Customer Pictures

Montana Firearms Group

DBA Montana Rifle Company

CUSTOMER PICTURES

Claude Banister, CPCU CLU Agent State Farm Insurance with a beautiful Nilgai taken in February 2009 with his Montana "Timberline Rifle" in 300 WSM.

Outdoor Writer Dr. Wayne VanZwoll and MRC President Jeff Sipe with Wayne’s 7+ foot Alaskan Black Bear taken with a MRC Summit Alaskan Rifle chambered in 375 H &H

Jerry Leuning and his 7 foot Alaskan Black Bear using a MRC Timberline chambered in 325 WSM

Joe Graham, Executive Director of NRA publishing with his record book bear taken with a Montana Rifle Company CCLM barreled action in 375 H & H. Stock work was done by Accurate Innovations, Sight work done by Dennis Olson of Plains, Montana.

Odusch-Black Wildebeest

Odusch-Gemsbok

Odusch-Leopard

"I have a very nice 1999 action that I have Pac nor barrel chambered in 300 RUM. I am very pleased and proud of this rifle. The buck was taken in Idaho at 320 yards and the speed goat was taken in Wyoming at 218 yards." ~Duane Burg

Red Stag harvested September 2009 in Texas hill country with my MRC rifle in 300 WSM ~Nathan Chambers

Participated in a cull hunt where the 375 H & H did great on wildbeest out to 400 yards. It's wearing a Swarovski Z6 1.7-10 scope with TDS reticle and will maintain 4" groups at 300 yards with my 300 grain Fail Safe handloads. Stock is Accurate Innovations with my wood and finishing. -Harry Sanders

Thanks for this awesome gun! -Randy

Axis deer taken in Texas Hill Country with Mrc in 300wsm by Nathan chambers June 2009

Joel Schafer-Stockmaker

Thanks for building such a a fine barreled action the specs that I wanted! All were with my .338-06 ackley M1999, Swift Sirocco 210 grs, Stocked and Cerecoated by Wayne York of Oregon. Cruiser Safaris South Africa. If you get the chance GO! Montana Rifle Co., Cruiser Safaris and Wayne York are a NO lose proposition!!!!!!

Here is my 2008 Wyoming Antelope...managed to take him out at about 280 yards with my 6.5 WSM. Was a GREAT hunt with great people and I look forward to doing to doing it again!! My guide said he should be over 80pts, we are awaiting the official "green" score to see what he tapes out at. -Brett Nelson from Leupold & Stevens

This is from my recent trip to Wyoming. I couldn't be more pleased with the 6.5x284 you built (and Lone Wolf stocked) for me this past year. I'm still tinkering with loads but am getting pretty consistent half inch groups with Berger 140grn VLD's. I'll be calling soon for my next project...and am anxiously awaiting the new professional action I have on order. -Scott Bruni

This is a MRC barreled action (7mm Rem Mag) that I bedded on a walnut stock (I bought an unfinished "Wildcat thumbhole" stock from Elk Ridge Stocks, but you can get the same stock from Richard's Microfit Gun Stocks, I think). The scope is from Huskemaw Optics (5x20x50), and it has a drop compensating turret and windage marks on the crosshairs (it's pricy, but a truly amazing scope). All in all, this rifle turned out very very nice. I just started reloading some rounds and shooting it, and so far the results have been fantastic. I'm shooting the 168 gr. Berger VLD bullets, and my best results (for accuracy) have come from using H4831-SC powder (I have also tried H1000 and Retumbo). Thanks, Andy (and that's my dog Willie in one of the photos) Andy Dwyer

Took my first moose last September in BC Canada using your Montana 1999 receiver, bedded in an Accurate Innovations stock, behind a Douglas barrel chambered for the 300 RUM, and topped off with a Leupold VX-3 3- 10x40 scope. Hit this yearling bull with the first shot, in the spine at the base of the neck, as he stood facing me 320 yards across a lake. I am very happy with this rifle's accuracy!-Dan KjellandSeattle, WA

These pictures of Robert Huguenard were from a very successful hunting trip to Africa using his custom made Model 1999 Stainless Steel .325 Winchester Short Magnum rifle.

Jeff's Daughter Mackenzie's 1st Mule Deer ever. Using a 257 Roberts Montana Rifle Company barreled action.

Here is the pictures of my Eland it is a gold medal Sci record book. I don't know where it places in the record book, yet anyway. The rifle is one of my custom rifles in a 300 H & H shot with a 200 grain Barnes Triple Shot at about 120yds. the rifle is a Montana Long Mag action carbon steel with a 28 in bbl also montana. All work was performed by Gun Creations such as blue printing, barrel installed, chambered, crowned etc. It is in a Gun Creations custom kevlar and carbon fiber stock and has a Kahles 4-12 X 56 multi zero scope set in Warne rings and bases.

John Odusch with a Bison bull he took using a Montana Rifle Company barreled action in 375 H & H with 300 grain Barnes TSX bullet at 100 yards.

Lynn Clugston with a beautiful Idaho mule deer taken with her MRC Barreled Action chambered in .280 Remington and seated in a Hogue stock.

I just got back from a hunt in Namibia with my .375 Montana. I can really recommed it, warm, great hunting, good prices!-Best Regards, Max

I just got back from Africa where I had great success with the rifle you made for me. Buffalo was 40" with 15" boxx, Kuda was 49", Blue Wildebeast was 29.5" -John Odusch

Here is Thomas Briggs & family with a lion he took in July 2004 with a Montana barreled action in 375 RUM. The lion was shot at 50 yards using 300 grain Nosler partitions and 260 grain Nosler Accubonds, all of which were very effective. The stock was done by Oregunsmithing.

Another note to share my success once again with the 280 rem you guys built for me 3 years ago. Aside from being a sub-moa shooter, I could not be more pleased than with the fact that its favorite diet is the 140 gr Barnes Triple Shock. The 2 black bears in the attached photo were taken in early June 2008 at Tyonek Lodge in Alaska, these 2 bears make 3 for me for the year and all 3 fell to the first shot so I could not be more happy. In the past 3 years my rifle is responsible for 4 Alaskan black bears, one moose and numerous whitetails and wild hogs, all but one wild hog were immediate one shot kills due to the accuracy that I have come to expect from my rifle. -Doug

I've been a long-time user of both your actions and barrels. Being a lefty, I think they're by far the best deal out there. I've attached some pictures from my recent trip to the Matetsi Safari Area in Zimbabwe. On this trip I used two rifles based on your actions and barrels, a .416 Remington for the big stuff and a .300 Winchester for everything else. They both functioned flawlessly, even when things got a little tense with the buffalo. Thanks again for a great product! -Peter Hunt

Jeff Anderson using a MRC Ultralight in 257 Roberts.

Suny Cheff using a Stainless Steel Woodland Rifle in 325 WSM.

Jon Roberts with MRC President Jeff Sipe with 2007 Whitetail using MRC Rifle in 300 WSM.

Dear MT Rifle Company. I have both action and barrel from your company. The barrel is a custom profile and 25.5 inches long. It was made to duplicate an old Rigby profile from a 350 Rigby. My caliber is a 6.5X55SE and I am able to get less than 2 inches at 305 yards with factory Lapua 155 grain Mega loads. The action and barrel are flawless and are more than I ever expected. Next I will use this gun for a model for my 376 Steyr project to match.

Dan Dill
Humboldt California

Montana Rifle Company & MRC are registered trademarks of Montana Rifle Company. All other company and product names may be trademarks of their respective companies. © Copyright 2008- Montana Rifle Company. All Rights Reserved.